TFA 35.1044.55.IT Manuale delle Istruzioni

18 WEATHER STATION Instruction Manual INTRODUCTION: Congratulations on purchasing this advanced weather station as an example of innovative des

27 Once to show the MAX indoor temperature and humidity data with the recorded time and date. Twice to show the MIN indoor temperature and humidity

28 and the weather is expected to improve, but when indicator points downwards, the air-pressure is dropping and the weather is expected to become w

29 2. Once the MIN or MAX data is displayed, press and hold the SET key for 3 seconds to reset the respective MIN or MAX record to current temperat

30 possible despite the observation of these factors, all system units have to be reset (see “Setting up” above). POSITIONING THE WEATHER STATION:

31 doors, double glazing, etc.). Before securing in place, please ensure that the Weather station can receive the 868MHz signal from the Temperature

32 • The unrestricted disposal of electronic waste may do harm on public health and the quality of environment. • This product must however not be

19 • Table standing or wall mounting The Outdoor Temperature Transmitter • Remote transmission of outdoor temperature to weather station by 868

20 batteries in the Weather Station” above). Once the batteries are in place, all segments of the LCD will light up briefly and a short signal tone

21 not be more than 100 meters (see notes on “Positioning” and “868 MHz Reception”). IMPORTANT: Transmission problems will arise if the setting fo

22 Weather tendencyindicatorTime Calendar display Indoor relative humidity in RH% Time reception icon (for DCF time)Indoor temperature inºC/ ºFWeath

23 * When the signal is successfully received by the weather station, the Outdoor reception icon will be switched on. (If not successful, the icon w

24 In area where reception of the DCF time is not possible, the DCF time reception function can be turn OFF. The clock will then work as a normal Qu

25 Digit flashing Digit flashing 1. The year starts flashing. 2. Use the OUT/+ key to set the year (between year 2003-2029). 3. Press

26 Digit flashing The default relative pressure value is 1013 hPa (29.92 inHg). This can be manually set to another value within the range of 960 –